Clinton County Raceway
2008 Four-Cylinder Enduro Rules and Specifications
Click here for printable rules
1. All cars must be 4-cylinders non-turbo charged front wheel drive American or foreign stock passenger cars. No pick-up trucks, jeeps, or convertibles permitted. Cars must have full solid steel roof. Spoilers, wings, wind deflectors, etc. permitted. Bodies must remain stock. Cars must be factory with 12", 13" or 14" wheels only. Wheels may only be maximum 6" wide and steel.
2. INTERIOR of cars must be gutted of all combustible materials including carpeting,
door and quarter trim panels, headliners and all seats. The dash may remain.
Driver's seat must be a racing seat with at least a 5 point racing harness and
must be securely fastened to frame and in good working condition. A window net
is mandatory for driver's side door.
3. All doors must be welded shut with a minimum of two 1/8" x 1"x6"
steel flats welded along the body side. Top of window frames to roof must be
welded shut with minimum of 1/8" x 1" x10" steel flat. Front
and rear bumper systems must remain stock. No additional bracing or tubing behind
bumper mounting brackets permitted. Bumper shocks must remain functional. Roll
cage must be a four post design and top of roll bar must be connected to form
a box section and be at least four inches above driver's head. Bar must be securely
fasted to FRAME by WELDING. No screwed pipe fittings allowed. All roll bars
must be a minimum of .090 wall thickness. Seamless tubing of 1 1/4" or
seamed tubing of 2" outside diameter must be used. Must have at least three
door bars on driver's side and two door bars on passenger side.
4. ALL glass and plastic trim must be removed from the outside of the body.
All headlights, taillights, marker lights, grilles, mirrors, door handles and
any miscellaneous exterior plastic must be removed. Windshield may remain. No
additional cutting away or cutting down any of the car's body is permitted.
5. ALL suspension and steering parts must remain stock. No beefing up or replacing
of suspension or steering parts with heavy-duty parts is permitted. Tires must
be steel belted radials of 65, 70 or 75 series only and must carry DOT number.
All tires on car must be of the same size.
6. ALL radiators, gas tanks, and batteries must remain in stock location. No
additional cooling systems permitted. Radiators must have overflow catch can.
Gas tanks and filler neck assemblies remain must stock. Cars must run complete
stock air cleaner assembly. Fuel cells may be relocated in trunk. Trunk floor
must remain stock. No lowering of fuel cells.
7. Cars must have a minimum or 20" high number taped or painted on doors.
8. ALL cars must have an approved fully charged fire extinguisher securely mounted
with reach of driver.
9. Driver fire resistant uniforms and a helmet with a face shield is MADTATORY.
A neck brace, fire resistant gloves, head sock, and underwear are recommended.
10. Seat belts and Snell 98 approved helmets must be worn at ALL times when
car is under power.
11. No devices such as radios for communication are permitted